Victor E-Tec EFI Small Block Chevy Intake Manifold

The Edelbrock Victor E-Tec EFI #29145 intake manifold is a Vortec/E-Tec version of our popular Victor E 23-degree EFI manifold and is intended for EFI applications like our Pro-Flo 3 EFI system. This manifold features a similar deep plenum and tapered cross-sections like the Victor E 23-degree and is compatible with standard, square-bore, throttle bodies. This manifold is one inch shorter than the existing Super Victor E-Tec EFI #29135. It also has provisions for water bypass so it can be used on Vortec engine blocks and accepts OEM alternator brackets. The Edelbrock Victor E-Tec EFI #29145 is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds. Edelbrock engineers work in conjunction with leading engine builders from all forms of competition to design manifolds compatible with the latest technology. Whether you're building a daily driver, ultra high-performance street machine or race car, an Edelbrock intake manifold will provide the power right where you want it. The Edelbrock Victor E-Tec EFI #29145 also features a natural aluminum finish for a classic look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.

Installation Notes:
• Recommended intake gasket: Edelbrock #7235 or GM #89017465
• Edelbrock matching fuel rail kit #3630
• Carb pad height: 6.77”
• Port exit dimensions: 1.14”x 2.20”
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
• Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.