FREE Shipping on orders over $50*

Performer-Plus Camshaft Kit for Small-Block Oldsmobile 350-403 V8

$353.95
Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine.
TEMPORARILY OUT OF STOCK
SKU
3712
The Edelbrock Performer-Plus #3712 is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #3712 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

Installation Notes:
• Designed for small-block Oldsmobile, 350-403, V8
• Produces 330 ft.-lbs. when matched with #3711 intake and stock heads.
• May require longer than stock pushrods.
• Will not fit 1966 & earlier.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347037124
Series Performer-Plus
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 204 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Advertised Exhaust Duration 290 deg
Advertised Intake Duration 280 deg
Intake Valve Lift 0.448 in
Lifter Type Hydraulic
Lobe Separation 114 deg