Lunati HOT Summer Deals on Valve TrainShop Now

Performer-Plus Camshaft Kit for Small-Block Chrysler 318-340-360 V8

$481.95
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine.
TEMPORARILY OUT OF STOCK
SKU
7177
The Edelbrock #7177 Performer RPM Camshaft is designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Installation Notes:
• Designed for Small-Block Chrysler, 318-340-360, V8
• 417 HP & 397 ft.-lbs. with #7176 intake & #60779 heads. Not for 1985-later engines with roller lifters. Adjustable pushrods or rocker arms required.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071777
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 234 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Advertised Exhaust Duration 318 deg
Advertised Intake Duration 308 deg
Intake Valve Lift 0.488 in
Lifter Type Hydraulic
Lobe Separation 112 deg