Lunati HOT Summer Deals on Valve TrainShop Now

Performer-Plus Camshaft Kit for Oldsmobile 400-425-455 V8

Edelbrock Performer-Plus #2152 is designed for 400-425-455 Oldsmobile V8 engines and produce optimum torque from the low-end to the mid-range.
In stock
The Edelbrock Performer-Plus #2152 is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2152 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

Installation Notes:
• Designed for Oldsmobile, 400-425-455, V8
• Produces 445 ft.-lbs. when matched with #2151 intake and stock heads. Will not fit Toronados or 1966 and earlier. Fits 1967-84 400-425-455, 39° bank angle engine.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021529
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 224 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Advertised Exhaust Duration 298 deg
Advertised Intake Duration 288 deg
Intake Valve Lift 0.472 in
Lifter Type Hydraulic
Lobe Separation 112 deg