Lunati HOT Summer Deals on Valve TrainShop Now

Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8

Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range.
The Edelbrock Performer-Plus #2167 is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2167 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.

Installation Notes:
• Designed for Big-Block Ford, 429/460, V8
• Produces 455 ft.-lbs. when matched with #2166 intake and stock heads.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021673
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 194 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit
Advertised Exhaust Duration 282 deg
Advertised Intake Duration 272 deg
Intake Valve Lift 0.460 in
Lifter Type Hydraulic
Lobe Separation 110 deg