Free Shipping on all orders over $50* Learn More

Performer-Plus Camshaft Kit for Big-Block Chevy 396-427-454 V8

$390.95
Edelbrock part #7162 Performer RPM Camshaft is designed for big-block Chevy 396-427-454 V-8 applications. This Edelbrock cam kit produced 540 HP & 530 ft-lbs. of torque when used with #7163 intake and #60559 cylinder heads on a 454 engine.
TEMPORARILY OUT OF STOCK
SKU
7162
The Edelbrock #7162 Performer RPM Camshaft is designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Installation Notes:
• Designed for Big-Block Chevy, 396-427-454, V8
• 540 HP & 530 ft.-lbs. with #7163 intake & #60559 heads. Not for 1965-66 big-block Chevys requiring a grooved rear cam journal.
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071623
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 240 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code N/A
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Advertised Exhaust Duration 306 deg
Advertised Intake Duration 300 deg
Intake Valve Lift 0.560 in
Lifter Type Hydraulic
Lobe Separation 112 deg