Free Shipping on all orders over $50* Learn More

Performer-Plus Camshaft Kit for AMC 343-401 V8

$427.95
Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine.
In stock
SKU
7132
The Edelbrock #7132 Performer RPM Camshaft is designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Installation Notes:
• Designed for Small-Block AMC, 343-401, V8
• 433 HP & 489 ft.-lbs. with #7531 intake & #60119 heads.
• For non-computer controlled vehicles
More Information
Manufacturer Edelbrock
Application Application Specific
UPC 00085347071326
Grade Type Performance
Lifter Materials Hardened Steel
Computer Controlled Compatible No
Intake Duration .050 Inch Lift 234 deg
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Intake Valve Lift 0.520 in
Lifter Type Hydraulic
Lobe Separation 112 deg