Although a mouse should be used
with T-Com™ WP, the following section will demonstrate how to use the keyboard
for navigation and editing.
4.1.1
General
All menus can be navigated with
the arrow keys, the Tab key, the ALT key and the Enter key. The ESC key will
generally back out from any menu.
A menu may be selected by
simultaneously pressing the ALT key and the first, underlined letter of the
desired menu. For example, to select the File menu, press ALT and
F. The arrow keys may then be utilized to make a selection or change menus.
4.1.2 'Hot Keys'
Pressing a 'Hot Key' will abort the current process and
immediately execute the associated function.
Active
from all menus
|
F1
|
Help for current window
|
|
Ctrl_G
|
Go Online
|
|
Ctrl_H
|
Go Offline
|
|
Ctrl_M
|
Monitor
|
|
Ctrl_K
|
Monitor Setup
|
|
Ctrl_N
|
Create new calibration File
|
|
Ctrl_O
|
Open new calibration File
|
|
Ctrl_S
|
Save calibration File
|
|
Ctrl_A
|
Save calibration File as
|
|
Ctrl_X
|
Cut
|
|
Ctrl_C
|
Copy
|
|
Ctrl_V
|
Paste
|
|
Ctrl_Y
|
Redo
|
|
Ctrl_Z
|
Undo
|
|
Ctrl_R
|
Retrieve calibration from Unit
|
|
Ctrl_W
|
Watch channel
|
|
Ctrl_F7
|
Cascade Windows
|
|
Ctrl_F8
|
Tile Windows
|
|
Ctrl_E
|
Explorer View
|
Active
only from tables/charts
|
Ctrl_L
|
Linearize selected data
|
|
Ctrl_P
|
Add a specified percentage to selected data
|
|
Ctrl_J
|
Set selection to
|
|
Ctrl_+
|
Add specified value to selected data
|
|
Ctrl_-
|
Subtract specified value to selected data
|
|
Ctrl_i
|
Increase/Decrease selection
|
Active
only from datalog viewer software
|
Right arrow
|
Move right by one datapoint
|
|
Left arrow
|
Move left by one datapoint
|
|
Up arrow
|
Move right 10 datapoints
|
|
Down arrow
|
Move left 10 datapoints
|
|
Page up
|
Move right one page of datapoints
|
|
Page down
|
Move left one page of datapoints
|
4.1.3
In a Menu
With a keyboard, use the arrow
keys to highlight the desired selection from the menu. Use the « key to select it.
4.1.4 In the Data Record Screen
|
←↑→↓
|
Moves the edit cursor through the
graph using the left and right arrow keys.
·
As the cursor is moved through the data, the dashboard in the
lower portion of the window will display sensor data from the log.
·
If the [Ctrl] key is pressed while moving through the data,
larger steps will be made.
If the [Shift] key is pressed
while moving through the data, a second cursor will appear and the sensor
values in the dashboard will display the average data for the time between
the cursors.
|
4.2.1 General
All menus are navigable via a mouse just as
any standard Windows-style interface.
4.2.2 In a 2D Table
The cursor
location along a given curve can be selected by simply clicking the mouse in
the desired location on the graph. (In the case of multiple parameters on the
same graph, the TAB key is required to toggle between the various parameters.
See Part Two-4.1.4)
The value of
any single point along the X-axis can be changed by simply holding the left mouse
key (the cursor will appear as a small hand) and dragging the point to the
desired value.
