|
High Torque
Starters
For tow truck and Street performance applications we offer an OEM
remanufactured starter with four full fields of windings and high
temperature solenoids. Producing 20% more cranking power than stock, the
High Torque Starter is resistant to heat developed by performance
exhaust headers and takes repetitive cranking without failure.
Applications for most performance applications.
| |
Engine
Size |
Remarks |
Part
No. |
 |
289,
302, 351C, 351W |
Fits
automatic transmissions only - two bolt flange |
312400  |
| 289,
302, 351C, 351W |
Fits
manual transmissions only - two bolt flange |
313200 |
| 390,
427, 428 |
Will
not fit 427FE block, three bolt flange |
313100 |
| 400,
429, 460 |
Two
bolt flange |
314200 |
 |
All
B/B & S/B 400, 168 tooth only |
Aluminum
nose with diagonal pattern |
351000 |
| All
B/B & S/B 400, 168 tooth only |
Cast
iron nose with diagonal pattern |
356000 |
| Olds, Pontiac |
350
- 455 |
|
369600 |
|
High Temp Solenoid
For High Torque Starter
|
Description
|
Part No.
|
| High Temp
Solenoid For High Torque Starter
|
376400
|
Racing
Starters
For drag racing and applications where a
smaller and lightweight starter is desired we offer what we believe is
the finest quality racing starter available on the market. Manufactured
by Hitachi for TCI® these starters are one third smaller than most
original equipment starters, which means increased room for headers and
oil pan, plus increased ground clearance.
 |
New, not rebuilt
|
Full ball bearing construction means
less internal friction and more torque transferred to engine
|
|
High temperature epoxy-encapsulated
armature resists heat and vibration
|
Balanced armatures
|
Heavy duty solenoid utilizes a contact
disc instead of bar type contact for more consistent starts
|
Low amperage draw of 210-250 amps at
full starting load provides increased spark for the ignition system
|
Each starter is individually tested
under starting load for insured dependability and reliability
| | | | | |
|
Permanent Magnet
Racing Starter
 |
Racing
Starters
|
Extreme
Racing
Starters
|
| Weight |
|
At 7.5 lbs., it's about 50%
lighter than OE |
|
|
At 10.5 lbs., it's about 33%
lighter than OE |
|
|
At 11.5 lbs., it's about 25%
lighter than OE |
|
| Horsepower |
|
1.74 Hp |
|
|
1.9 Hp |
|
|
3.0 Hp |
|
| Gear
Reduction |
|
6 to 1 reduction |
|
|
3.73 to 1 reduction |
|
|
3.73 to 1 reduction |
|
| Applications |
|
up to 11.0 to 1 compression |
|
|
up to 12.0 to 1 compression |
|
|
up to 11.5 to 1 and higher
compression |
|
| Bearings |
|
heavy duty pinion bearing |
|
|
full ball bearing construction |
|
|
full ball bearing construction |
|
| Indexing |
|
12 clocking solenoid
positions |
|
|
|
| Technology |
|
latest technology in permanent
magnets |
|
|
High temperature
epoxy-encapsulated armature resists heat & vibration |
|
|
Applications
| |
Engine Size
|
Starter
Type |
Remarks |
Part
No. |
|
289, 302,
351C, 351W, FE 382-427 |
Racing
Starter |
Fits
automatic transmissions only; two-bolt flange |
351300 |
| 400, 429,
460, 351M, 400M |
Racing
Starter |
Fits
automatic transmissions only; three-bolt flange |
351600 |
| 289, 302,
351C, 351W, FE 382-427 |
Extreme
Racing Starter |
Two-bolt,
bigger motor for high compression or 500+ cid applications
(weighs 11.5 lbs.) |
351309 |
| 400, 429,
460, 351M, 400M |
Extreme
Racing Starter |
Three-bolt,
bigger motor for high compression or 500+ cid applications
(weighs 11.5 lbs.) |
351609 |
| Chrysler |
All V8
& 3.9L V6 |
Racing
Starter |
Also
works with TCI® adapter kits, P/Ns 149100,149200,149400 |
351500 |
|
All Chevy
153 & 168 tooth |
Racing
Starter |
Our #1
selling starter! Now with multiple clocking positions. |
351100 |
| All Chevy
153 &168 tooth |
Permanent
Magnet Racing Starter |
Feather light
permanent magnet motor 12 clock positions, only 7.5 lbs, small
size works great in dragster applications |
351106 |
| All Chevy
153 & 168 tooth |
Extreme
Racing Starter |
Bigger
motor for high compression or 500+ cid applications
(weighs 11.5 lbs.) |
351109 |
| All LS Series |
Permanent
Magnet Racing Starter |
Feather light
permanent magnet motor 12 clock positions, only 7.5 lbs, small
size works great with aftermarket headers |
351110
|
| Olds,
Pontiac |
350-455 |
Racing
Starter |
|
351400 |
|
Pinion Gear Replacement Set
Contains all items normally required to replace the pinion gear.
Includes new pinion gear assembly, spring and cup.
| Application |
Part No. |
| Fits part
numbers 351100, 351109 & 351400 |
351126 |
| Fits part
number 351106 |
351130 |
Starter Solenoids
Replace your TCI® starter solenoid.
| Application |
Part No. |
| Fits part
numbers 351100, 351300, 351600, 351309 & 351109 |
351125 |
| Fits part
number 351106 |
351128 |
Quick Disconnect
Starter Harness
Patented unit is manufactured from heat resistant high impact plastic
and OEM connectors. Saves valuable time during engine changes and cleans
up engine compartment appearance.
| Application |
Part
No. |
| For use
on one- or two-wire GM starters; wires are color coded to OEM
specifications for easy installation |
351073 |
| For use
on all Hitachi Racing Starters |
351173 |
|
