Touch Screen Dash/Data Logger
New dual function stand-alone electronic dashboard and data logger allows precise tuning of TCI® Transmission Control Unit

The TCI® Transmission Control Unit is well known for its ability to deliver the ultimate control over your automatic transmission’s operation. The new TCI® Touch Screen Dash/Data Logger is the perfect complementary device that serves as an electronic dashboard and data logger for vehicles running the TCI® Transmission Control Unit. The high-resolution, backlit 320 x 240 pixel display can be touch-programmed by fingers or with a stylus and provides simultaneous monitoring and data logging of over 100 input channels – meaning you can make all adjustments to the transmission control unit from the dashboard without the use of a laptop computer.

The TCI® Dash/Data Logger features a six-inch, fully programmable LCD touch screen that can display data in multiple ways, such as scales, units and gauge configurations, to assemble a comprehensive, real time picture of exactly what is happening with your transmission. The dash/data logger will monitor and display output from a variety of different sources, including frequency (rpm, wheel speed, etc.), analog input and sources that require programmable input parameters. It will also control the shift points, line pressure, shift firmness and torque converter lock up point, as well as log and monitor data from other engine management systems. The unit delivers over one hour of data logging time with its 2 MB memory module.

Description	Part #
Touch Screen Dash/Data Logger	377525

TCU Wiring Harness
TCI® Transmission Wiring Harnesses are fully pre-assembled and tested, making it easy to install even the most advanced computer-controlled transmission. TCU wiring harnesses feature all OEM-style connectors, high temperature oil resistant wiring and puncture-resistant outer sheathing for years of dependable service.

All connections are butt connected, crimped, and soldered for maximum mechanical and electrical integrity. These superb-quality harnesses feature clearly labeled connections, making them simple to install and vastly superior to trying to adapt a confusing, unlabeled factory harness to your new transmission controller.

Description	Part #
Transmission Control Unit (TCU) Wiring Harness - GM / Chevrolet 4L60E, 4L65E, 4L70E, 4L80E, 4L85E	377502

 TCU Distributor Adapter Harness
Adapts the distributor connector into a GM vehicle's existing wiring harness.  

Description	Part #
Distributor Adapter Harness	377100

TCU Throttle Position Sensor Adapter Harness
Allows the TCU main harness to be pigtailed into an existing TPS while still functioning with the engine control module. This is a plug-and-play solution for splitting the TPS signal.

Description	Part #
TPS Adapter Harness for 2nd generation-style TPS	377200
TPS Adapter Harness for 1st generation-style TPS most commonly found on earlier computer-controlled carburetors	377201

Speedometer Control Unit (SCU)
The perfect solution to retrofitting an electronic transmission, this economical adapter pigtails into the electronic speedometer harness and has a connection to drive a cable-driven speedometer. Fully configurable for any tire size and rear gear ratio! Cables sold separately due to OEM variations.

Description	Part #
Speedometer Control Unit (SCU)	377300
Cable, 5/8" threaded ends, fits most pre-1976 domestic vehicles	377301
Cable, GM clip-on style, fits most 1976 and later GM vehicles	377302

Remote TPS and Mount
GM type sensor mounted on base with cable actuation. Fully adjustable and works well with carburetor applications.

Description	Part #
Remote TPS and Mount	377400

Remote TPS For Carbureted Applications
To utilize any computer-directed engine management system, you have to know the position of the throttle at all times. For carbureted engines, this has always been a difficult problem to overcome. The new TCI® Remote TPS for Carbureted Applications with a TCI® Transmission Control Unit provides a throttle position reference that allows any carbureted application to use the popular TCI® transmission management electronics.

The TCI® Remote TPS for carbureted, Transmission Control Unit-equipped engines features a simple three-wire design, making it easy to install. The adjustable cable allows for various mounting locations on your engine and the special supplied bracket provides a place to mount the throttle cable as well as giving a professional looking final appearance.

Description	Part #
Remote TPS For Carbureted Applications	377401

TV Cable Bracket

Description	Part No.
700R4 & 2004R Carter® AFBT, QuadrajetT, Edelbrock®	376700
700R4 & 2004R Holley® carburetor	376705